Water Cooling Welding Electrode House Building Welded Steel Mesh Production Line
Welded Steel Mesh Production Line Introduction:
The Welded Steel Mesh Production Line is equipped with automatic straightening cutting device. This device straighten and cut weft wire into fixed length. Then worker put those weft wires into hopper, the weft wires will fall automatically. Coil wires are put on the wire tray. Firstly, let coil wires through straightening device,this device will make the coil wire become straight. Then let coil wire through into warp hole, finally the entire welding process is automatic.
The welded steel mesh production line adopts synchronous and PLC control technique. The welding power comes from thespring. It is easily to control the welding pressure, more over ten times than the traditional hopper. Welding time and sub-control welding adopt Japan, Sony digital control system which can be input totouch screen control panel to adjust the mesh size, What’s more, the below electrodes installed water-cooling equipment, which reduce the loss and ensure welding quality.
The mesh pulling system is controlled by servo motor, which makes the pulling mesh aperture morestandard and accurate. This automatic pulling device can be separated from the welded machine.
This welded steel mesh production line can weld continuous wire mesh sheets. After the wire mesh sheets enter into the automatic cutting machine, the cutting machine can cut the wire mesh sheet into fixed-size according to you need.
Welded Steel Mesh Production Line Technical Parameters:
| Model | DX-GWCD-1600 | DX-GWCD-2000 | DX-GWCD-2400 |
| Thickness of steel wire | 3.0-6.0mm | 3.0-6.0mm | 3.0-6.0mm |
| Welding mesh width | 1600mm | 2000mm | 2400mm |
| Mesh length | As per required | As per required | As per required |
| Line wire space | 50-300mm | 50-300mm | 50-300mm |
| Cross wire space | 50-300mm | 50-300mm | 50-300mm |
| Line wire form | Coil wire | Coil wire | Coil wire |
| Cross wire form | Pre-cut | Pre-cut | Pre-cut |
| Welding electrodes | 32PCS | 40PCS | 48PCS |
| Welding transformer | 160kva*4pcs | 160kva*5pcs | 160kva*6pcs |
| Main motor | 4.0kw | 4.0kw | 5.5kw |
| Control system | By PLC and touch screen | By PLC and touch screen | By PLC and touch screen |
| Control switch | Schneider France | Schneider France | Schneider France |
| Upper electrode size | 20*120mm | 20*120mm | 20*120mm |
| Down electrode size | 20*20*20mm | 20*20*20mm | 20*20*20mm |
| Machine weight | 3.5T | 4.3T | 4.8T |
| Machine dimension | 7500*2300*1700mm | 7500*2700*1700mm | 7500*3300*1700mm |
| Welding speed | 50-80 times per min | 50-75 times per min | 50-65 times per min |
Note: all parameters can be customized according to costomer's requirements.
Standard accessories:
1. Automatic mesh panel cutting mesh device
2. According to the solder joints equipped with the same number of wire tray
3. Automatically wire straightening and cutting machine
Welded Steel Mesh Production Line Applications:
Wire mesh welding machines are always applied in building mesh, fence mesh and steel mesh reinforcement.
Welded Steel Mesh Production Line Packing:
Welded Steel Mesh Production Line Photos:
Product Tags:
|
|
PLC 5.5KW Automatic Reinforcing Mesh Welding Machine Images
|
